Stabilizers 5KVA-250KVA(1Ph)
Stabilizer are made with for providing stabilizing voltage for all kinds of loads.
Application
IT, Power plant, Mining industry, medical equipments,lighting, Telecommunication system, research institutes, oil plant, chemical company, Lab, industrial equipments, office appliances,digital controlling equipments,electric networks,ect.
Introduction
Stabilizers are made of transformers, servo motors, automatical controlling circuits. When AC power is distortion or fluctuates, stabilizer controlling circuit can automatically modify output according to voltage and drive the servo motor to adjust the carbon brush of auto transformer which can maintain the output voltage in stabilization. Our stabilizers can automatically balance the output voltage and make load equipments woking in perfect condition.
Specification
| Model | DBW series 5KVA-250KVA | |||||||||
| Capacity | 5KVA | 10KVA | 15KVA | 20KVA | 30KVA | 40KVA | 50KVA | 100KVA | 200KVA | 250KVA |
| Input | ||||||||||
| Voltage | 220/230/240VAC Single phase 2 wire+G | |||||||||
| Voltage range | ±20% | |||||||||
| Frequency | 50/60HZ | |||||||||
| Frequency range | 50HZ:(46~54HZ);60HZ;(56HZ~64HZ) | |||||||||
| Output | ||||||||||
| Voltage | 220/230/240VAC(1±2%) | |||||||||
| Frequency | 50/60Hz±0.05Hz | |||||||||
| Efficiency | 92% | |||||||||
| Protection | overload,overvoltage,overcurrent,overheat,short circuit | |||||||||
| Current Crest Ratio | 3:1 | |||||||||
| Display | LED or meter | |||||||||
| Response time | <1s | |||||||||
| Insulation resistance | ≥2MΩ | |||||||||
| Anti-electricity surge | 1500VAC for 60 minutes | |||||||||
| Working temperature | 0~40°C | |||||||||
| Humidity | 0~95% non-condensing | |||||||||
| Storage temperature | -25°C~55°C | |||||||||
| Elevation | 1500M | |||||||||
| Noise | <45dB | |||||||||
| Dimension(mm) | 280x150x260 | 850x850x1700 | 800x1100x1700 | |||||||
| Weight(kgs) | 15 | 30 | 53 | 59 | 90 | 100 | 130 | 200 | 350 | 400 |
