Greencisco Industrial Co., Ltd.

Static transfer switch (rack mount )

Static transfer switch are widely used for Local area network, cash registers, tax, telecom, postal, electricity, medical, industrial control, national defense, petrochemical,power plants, ect.

Characteristics

Introduction

STS static transfer switch can make single phase(220Vac) or three phases(380Vac) to conduct continuous switch between first choice and prepared choice by manual or automatic method.
It can set or reset first choice power and prepared choice power according to requirements. When first power is fault, system will switch to prepared power automatically.
STS work according to method of break before connect, which ensure two circuits of power will not be in parallel connection in any power environment. Which ensure load to be in duplicate protection. STS can realize continual switch among 4 kinds of different input power to single power output. It can be compatible with N+1 redundancy of UPS of different capacity and brands.
Features
Transfer time is less than 6ms
It doesn’t have arc phenomenon
System has smart audible and visual alarm function
With 19” rack mount type and tower type available
System can be set by users according to their needs.
STS is with digital SCR. The connection and breaking speed is very fast.
STS is no ARC phenomenon is starting and stopping, so that prolong the life of system
System can be compatible with same phase and different phases input at the same time
STS can be compatible with electricity to electricity,electricity to UPS, UPS to UPS, stabilizer to UPS
System adopts synchronous control technology to ensure consistence in the switch and load equipments.
STS has perfect protection function of overvoltage,undervoltage,power failure,overcurrent,phase difference,ect
Specification

Model

SC-1116

SC-1125

SC-1130

SC-1132

SC-1140

SC-1163

SC-1110

Capacity

3.5KW

5.5KW

6.6KW

7KW

8.8KW

13.8KW

22KW

M1 input voltage200-240Vac+/-5V
M2 input voltage200-240Vac+/-5V
Input frequency50/60Hz
Power environmentsame phase and different phases
Rated current16A

25A

30A

32A

40A

63A

100A

Switch time<6ms
Output interfaceIEC/C13/C19

IEC C19

cable row

PriorityAutomatica setting
Output voltage200-240Vac+/-5V
Output overcurrent110%
Efficiency98%
DisplayLED/LCD
CommunicationRS232,dry contact
Protectionovervoltage,overcurrent,shortcircuit,ect
Temperature0C-40C
Humidity10-90%
Size(mm)482x250x44

482x400x133

StandardEN5009-2,IEC60950,IEC61000-3-2,IEC61000-4-2