POE DC UPS 200W for Network,Telecom
Greencisco POE DC UPS is our patented products, includes software for UPS. Patent No.:L20120028001,professionally for telecommunications,network communication,office equipments,traffic singal and routers.ect. Can be with internal controller for remotely monitoring and controlling. With 220VAC input, 8pcs of 24Vdc or 48Vdc POE outputs for loads, 24Vdc or 48Vdc can be separately monitored or controlled of switch on/off remotely. With our IPpowerspace monitor host and our software, which can remotely monitor and control 1000-3000pcs of UPS installed at different network sites at the same time. We successfully made and provided IP55 outdoor POE UPS(water proof) to esteemed Telefónica company for telecommunication.
Introduction
POE UPS is our patented products, includes software for UPS. Patent No.:L20120028001,specifically designed for outdoor wireless communication device, network, microcellular base stations,transportation signal,routers,CCTV, ect; With water resistance,dust resistance,heat resistance,IP20, IP55 available. Can be with internal controller for remotely monitoring and controlling. With 220VAC input, 8pcs of 24Vdc or 48Vdc POE outputs for loads, 24Vdc or 48Vdc can be separately monitored or controlled of switch on/off remotely.
With our IPpowerspace monitor host and our software, which can remotely monitor and control 1000-3000pcs of UPS installed at different network sites at the same time. We successfully made and provided IP55 outdoor POE UPS(water proof) to esteemed Telefónica company for telecommunication.
Features
●DC UPS and POE functions
●Input voltage range: 176VAC-265VAC,50/60Hz,output voltage:12V/24V/48VDC available
●Capacity:200W in Maximum
●Communication: RS232,USB,SNMP,wifi optional for remotely monitoring
●Battery: can be with VRLA,lithium battery,GEL batteries
●Transfer time: AC-DC: zero ms
●IP class: IP21 or IP55 available
●Cold start function
●POE UPS supports automatic MDI/MDI-X function,supply 4 or 8 POE power port
●10/100Mbps, full/half duplex automatic adapt
●Compliant with IEEE802.3af, IEEE802.3at standard, 25W Max per port
●Backplane switching capacity of 1.0Gbps
●Compliant with IEEE 802.3 10Base-T Ethernet
●Compliant withIEEE 802.3u 100Base-TX Fast Ethernet
●Compliant withIEEE 802.3x Flow Control and Back Pressure
●Compliant withIEEE 802.3af Power Over Ethernet
●Compliant withIEEE 802.3at Power Over Ethernet
●Transmit rate of Ethernet 10Mbps half duplex,20Mbps full duplex
●Fast Ethernet 100Mbps half duplex,200Mbps full duplex
●Interface of 10/100TX:RJ-45,all ports support automatic MDI/MDI-Xfunction
●Cable type 10BASE-T:CAT 3,4,5 UTP,upto length 100m in Maximum
●EIA/TIA-568 100 OHM STP,upto length 100m in Maximum
●100BASE-TX:CAT 5E UTP,upto length 100m in Maximum
●EIA/TIA-568 100 OHM STP,upto length 100m in Maximum
●Each port with indicator light, alarm light, device alarm light
●With 4 port POE or 8 port POE
●Metal case, with wall mounting hole
Specification
| Model | POE-160S5-100 | POE-160S5-150 | POE-160S5-200 | ||
| Capacity | 100W | 150W | 200W | ||
| Input | |||||
| Voltage | 220/230/240VAC Single phase 2 wire+G | ||||
| Voltage range | 176~265VAC | ||||
| Frequency | 50/60HZ | ||||
| Frequency range | 50HZ;(46~54HZ);60HZ;(56HZ~64HZ) | ||||
| Battery | |||||
| Voltage | 12V/24V/48V optional | ||||
| Charging time | 8 hours for 90% battery capacity | ||||
| Transfer time | 0ms | ||||
| Output | |||||
| POE interface | with 4 or 8 RJ45 communication ports output | ||||
| Standard | Conform to meet 802.3AF and 802.3AT standard for Power Ethernet | ||||
| Voltage | 12V/24V/48VDC | ||||
| Protection | Overload protection, over heat protection, overvoltage protection,undervoltage, over current,shortcircuit protection | ||||
| Display | LED | ||||
| Communication | Smart RS232, SNMP (Optional),USB(Optional) | ||||
| Working temperature | -20~50°C | ||||
| Humidity | 0~95% non-condensing | ||||
| Storage temperature | -25°C~55°C | ||||
| Elevation | 1500M | ||||
| Noise | <45dB | ||||
| Dimension(mm) | 125x88x45 | ||||
