欢迎访问格林思科实业有限公司官方网站

Rack mount UPS HP8118CRT Plus;PF:0.9/1.0

High frequency online UPS adopts double conversion and DSP digital control technology, with powerful functions.Which provide power protection for important equipments.

产品详情

Applications 

Local Area Networks,Cash Registers,Tax,Telecom,Postal,Radio and Television,Security Traffic,Electricity,Medical,Industrial Control,National Defense,Petrochemical,Ports and other important economic data field

Introduction

Rack mount online UPS adopts the double conversion online architecture ideal for resolving all issues on power supply. This state-of-the-art solution is especially designed for eliminating the power loss, extra high or low voltage of utility power, voltage sags or damped oscillation, high-voltage pulse, voltage fluctuation, surge voltage, harmonic distortion, clutter immunity, and frequency fluctuation etc., delivering safe and reliable power supply guarantee for user's load.

Main Features

●Its cut-edge digital technology of DSP (Digital Signal Professor), can greatly improve the products performance and system reliability, and deliver a compact integration with higher power density ;
●Output power factor up to 0.9 - applicable to the tendency of future load evolution, and deliver higher payload capacity; Higher payload and overload capability, better load compatibility, and suitable for various load type; Total power factor up to 90% can minimize the power loss of UPS and utilization cost for user; High Scalability: fully meet the customer's demands; Emergency Power Off (EPO): UPS can be instantly shut off in case of any emergency; Powerful Interference immunity capability in compliance with EMC requirements of IEC61000 -4, deliver your device a clean electric environment.
●Flexible Configuration on Demand
High Scalability:fully meet the customer's demands; Online Intervention: safe and online intervention without any power supply interruption to load; Emergency Power Off (EPO): UPS can be instantly shut off in case of any emergency, Parallel Kit: realize the parallel extension and redundancy function, offer more flexibility and safety for user's power supply planning;
●Intelligent battery management
With its advanced intelligent charge control mode, UPS can automatically select the optimal charge mode as per the battery type and conditions, thus further maximizing the lifespan
of battery bank. In addition, the system can periodically conduct the charge & discharge management for the battery bank. User also can select the battery voltage on demands.
●The user can query and set the proper UPS control parameters for intelligent UPS management.Automatically identify and adapt to 50/60Hz power supply system, fulfilling the requirements
in various power supply systems.
●Perfect failure protection and alarm function: provide complete failure protection and clear alarm notification function in case of I/O over -voltage or under-voltage,battery over-charge
or under-voltage, overload, and short circuit.
●Compact Design, Lower Noise
With leading control technology and craftsmanship, this UPS can greatly increase the power density and reduce the footprint, therefore save more expensive space in your office environment.Additionally, its lower noise during operation can allow you a more comfort working environment.
●Rich Communication 
Provide RS232、USB interface and communication cable for local or remote power supply management;Provide intelligent slot available to Window's Web Power (SNMP),CMC or AS400 card (dry contact) for remote management and monitoring function.
●User-friendly interface
LCD display accurate UPS working environment and working status to the user, through the LCD display panel can be set output voltage and frequency,at the same time can be set ECO mode , convenient for user to operate the UPS

Specification

Model

HP8118CRT Plus 1KVA-10KVA

Capacity

1KT

1KT-XL

2KT

2KT-XL

3KT

3KT-XL

6KT

6KT-XL

10KT

10KT-XL

1000W

2000W

3000W

6000W

10KW

Input
Voltage220/230/240VAC Single phase 2 wire+G
Voltage range115~300VAC

120~275VAC

Frequency50/60HZ
Frequency range50HZ:(46~54HZ);60HZ;(56HZ~64HZ)
Power factor>0.98
Output
Voltage220/230/240VAC(1±2%)
Frequency50/60Hz±0.05Hz
Power factor0.9/1.0
Harmonic DistortionLinear load<3%; Non-linear<6%
Overloadload>110%for 47s;105%
Current Crest Ratio3:1
Transfer time0 ms
Battery
DC voltage

24V

48V

72V

96/192V

Charge time5 hours to 90% (it means standard model which battery inside UPS)
Charge current

1A

4A/8A

1A

4A/8A

1A

4A/8A

2A

4A

2A

4A

LCD displayUPS status, input/output voltage and frequency,battery voltage, capacity,load temperature,history records,adjust Voltage,ECO mode
CommunicationSmart RS232, SNMP (Optional),USB(Optional)
Working temperature0~40°C
Humidity0~95% non-condensing
Storage temperature-25°C~55°C
Elevation1500M
Noise<45dB
Dimension(mm)

145x88x220

190x88x318

190x88x318

248x130x616

248x130x460

248x130x616

248x130x460

Weight(kgs)

14

8

25.5

13

33.5

16.5

59

24

70

24