欢迎访问格林思科实业有限公司官方网站

Inverter for Military

The military inverter power supply is a kind of special power supply which is developed for the special situation of military carrier and aviation.

产品详情

Introduction
The military inverter power supply is a kind of special power supply which is developed for the special situation of military carrier and aviation.The perfect filter circuit satisfies all the electromagnetic compatibility stipulated by the military standards. With the standard pure sine wave output,the harmonic content is small,the distortion is small. 
In addition,the inverter power has wide working temperature range, moisture-proof, shock-proof, corrosion-proof, stable performance and high reliability.To meet the special requirements of military equipment,the inverter power uses a variety of cabinet design to meet the requirements of space and install.Also the batteries can be configured according to requirements.

Specification


Model

GRM-0.5K

GRM-1K

GRM-2K

GRM-3K

GRM-5K

GRM-8K

GRM-10K

GRM-20K

GRM-30K

Capacity

0.5KVA

1KVA

2KVA

3KVA

5KVA

8KVA

10KVA

20KVA

30KVA

Circuit mode

IGBT / SPWM pulse width modulation

Work mode

Offline/Online/Inverter (can be choose)

AC input(optional)

AC110V/AC220V/AC380V

Charging mode

Three-stage intelligent charging of constant current-constant voltage-floating charge

(optional)

DC input

DC12V/24V/28V/48V/96V/110V/220V/500V/600V, (which can be choose)

Output voltage

AC36V±2%/115V±2%/220V±2%/AC380V±2%(which can be choose)

Output frequency

50HZ±0.05%/60HZ±0.05%/400HZ±0.05%/1000HZ±0.05%(which can be choose)

Voltage stabilization

≤±1%

THD

Linear load ≤3% , nonlinear load ≤5%

Power factor

0.1-1.0

0.8(inductive and capacitive load)

Efficiency

≥ 91%(from battery)

≥ 98%(from AC)

Transfer time

<4ms

Response time

At load from 0~%100% or 100%~0%之,output voltage≤2%

Noise(1M)

50~60dB

Display

LED

EMC

GJB151A-97  RE101,RE102,CE101,CE102

Protection

Overvoltage, undervoltage, overload, short circuit, overtemperature and other protection

Military standards

Damp-heat: According to GJB150.9-86《 environmental test method for military equipment damp-heat test 》 , there is no obvious rust on the equipment, each performance index is normal

Mould: According to GJB150.10-86《 environmental test method for military equipment, Mould Test 》, Salt fog: According to GJB150.11-86

Vibration: According to GJB150.16-86

Low pressure: Below 5000 m (including 5000 m) , all performance indexes are normal.

Insulated reactance

500Vdc  20MΩ

Voltage-resisting insulation

1500Vac/5mA/for 1minute

Cooling

Forced fan

Work Temperature

-40℃~70℃

Storage temperature

-55℃~80℃

Related humidity

0~90%(non-condensation)

Communication

RS232/RS485

Charging current

10A-200A  optional

Batteries

External

Appearance

Rack mount, modular type, vehicle-mounted type optional