Greencisco Industrial Co., Ltd.
MPPT controllers 220V/300A
MPPT solar controllers are widely used for solar power systems, solar street lights,ect.
Introduction
Solar controller work by DC/DC conversion, charging circuit and main control circuit to realize the automatic charging management of storage batteries and solar panels.Widely used in solar power system, solar street lights,etc. 
Features
●Built-in maximum power point tracking algorithm which could promote energy utilization efficiency of PV system. The charging efficiency is 20% higher than PWM mode.
●MPPT efficiency could reach to 99.9%
●The use of advanced digital power technology, circuit energy conversion efficiency is as high as 98%
●Four stage charging order mode: MPPT-equalizing charging-boost charging-float charging 
●With current-limiting charging mode, which enables system to work under the rated charging current.
●With RS232 interface,it can communicate with PC by communication wires and cables, read or set controller’s running parameters and monitor the system operation status.
●With the fault code indication; it helps users confirm the system fault
●Support data storage for 5 years.
●It can connect with LCD screen monitoring and the controller parameters are amendable.
●Built-in temperature sensor, when the temperature exceeds the set value, the charging current will lower down followed by the decrease of temperature, so as to control the controller’s temperature rise.
●With temperature compensation function to adjust the charge and discharge parameters automatically, which can improve battery service life.
●With protection functions of overcharge,overdischarge,overload,overheat and battery reverses connection protection.
Specification
Product MPPT Solar Charger Controller
Model PT220-30 PT220-50 PT220-60 PT220-100 PT220-300
Rated Voltage 220VDC
Charge current 30-300Amp
Max.PV open voltage 500VDC
Max capacity of solar panel 6.6KW-66KW
Way of solar panel input 1 Way
DC Overload protection 2.0 * Inom>5s
1.5 * Inom >20s
1.25 * Inom temperature controlled
Power consumption <10mA
Bulk charge 260Vdc (default)
Floating charge 248Vdc (default)
Equalization charge 252Vdc (default)
Over charge disconnection 260Vdc
Over charge recovery 243Vdc
Over discharge disconnection 187Vdc (default)
Over discharge reconnection 198Vdc
Temperature compensation -13.2mV/℃ -26.4mV/℃ -52.8mV/℃
Lead acid battery settings Adjustable
NiCd battery settings Adjustable
Load control mode Low Voltage Reconnect (LVR): Automatic
Low Voltage Disconnect (LVD):Automatic
Reconnection;warning flash,before disconnect,reconnection
Low voltage reconnect 198Vdc
Low voltage disconnect 187Vdc
Ambient temperature 0-40℃ (full load) 40℃-60℃ (derating)
Altitude 3000M
Protection class IP21
Cooling Natural cooling
Dimension(L*W*H)mm 700x620x1600
Weight(KGS) 18 30 40 60 140
About Us
Company Introduction
Principles
Mission
Global Certification
Contact us
Solution
New Energy
Network Solutions
Industrial Solutions
Household Solutions
Motive Power Solutions
Products
UPS
Telecom Power and Charger
Batteries
Photovoltaic Energy
Inverter and Stabilizer
Support
Partners
Technical Support